CUSTERS® Foldy 10 Pro Series Aluminum Folding Scaffold Tower

Safe Working Height: 10 ft | Platform Height: 3.5 ft | Heavy Duty Rating

The CUSTERS® Foldy Pro Series is a professional aluminum folding scaffold tower built for quick maintenance, service, and installation work at limited heights. Lightweight, durable, and fast to deploy, Foldy is a practical solution for work in homes, offices, garages, shops, and facilities—especially when indoor mobility and quick repositioning matter.

If ladders are slowing the job down and a lift is overkill, the Foldy 10 gives your crew stable access without complicated setup.

✅ Why Contractors Choose the Foldy 10

• Fast setup for repeat tasks and short-duration work

• Lightweight aluminum construction for easy handling and transport

• Efficient for moving room-to-room and zone-to-zone

• Ideal for maintenance, finishing, overhead work, and installation tasks

✅ North American Load & Duty Rating

• Max load capacity: 1,500 lbs (2 persons + equipment)

• Maximum workload per platform: 75 lb/ft² (Heavy Duty)

• Only one working level may be loaded at a time

✅ Working Height (This Configuration)

This listing is for the Foldy configuration with:

• Safe working height: 10 ft

• Platform height: 3.5 ft

✅ Included in This Kit (CUS-FP-6S)

This listing includes the core components required for the FOLDY 10 (CUS-FP-6S) configuration:

• 9501.771.010 — Folding Frame with two-way Locking Casters (Qty 1)

• 9501.316.015 — Trapdoor Platform (Qty 1)

• 9501.410.162 — Securing Pin / Clip (Qty 1)

Total kit weight: 77.13 lbs

✅ Compliance & Standards

All CUSTERS® scaffold towers are engineered, tested, and manufactured to meet or exceed the following requirements when assembled and used according to manufacturer instructions:

• CSA S269.2-21 (Canada)

• EN 1004-1:2020 (Europe)

• ANSI A10.8-2019 (United States)

• OSHA 29 CFR 1926 Subpart L (United States)

Designed and tested to meet CSA, EN, ANSI, and OSHA requirements.

✅ FOLDY 10 Use Guidance (Base Model – No Guardrails Included)

This FOLDY 10 base configuration is supplied without guardrails and is intended for work where the platform height is not positioned above 3.5 ft in accordance with our manual and recommended configuration.

If your job requires higher platform positioning, we strongly encourage you to upgrade your configuration or use appropriate fall protection.

Recommended Safety Options (Choose One)

• Upgrade to a Foldy package with guardrails (recommended for frequent use, longer-duration tasks, or higher positioning), such as:

  • CUS-FP-13S (Guardrails)

  • CUS-FP-13SX (Guardrails + Outriggers + Toeboard Holders)

• Use a certified fall protection system where required by your jurisdiction, employer policy, or jobsite conditions.

Important Notes

• Guardrail and fall-protection requirements vary by jurisdiction, employer policy, and site conditions.

• Always follow the manufacturer instructions, jobsite safety rules, and applicable regulations.

• Stability components (including outriggers) may be required depending on configuration and conditions.

⚠️ Fall Arrest Anchorage Warning (Important)

This scaffold tower is not an approved anchorage point for a personal fall arrest system (PFAS). Do not attach lanyards, lifelines, SRLs, or anchors to the tower. If fall arrest is required, use an independent, approved anchorage that is properly rated and installed in accordance with the applicable regulations and jobsite safety plan.

✅ Ordering Notes

• This listing is for CUSTERS Foldy 10 Pro Series — Model CUS-FP-6S

• Need more height? Ask about FOLDY 13 and FOLDY 18 configurations or move up to our Heavy Duty Handy  configurations with working heights up to 150 ft.!

• Not sure what you need? Message us and we’ll recommend the right setup for your job